Cart
Don't worry, you can adjust your order via the cart page before checking out!
Checkout Secure

Covid-19 Notice: In light of current difficulties in the supply of Glasswool and Mineral Wool we would like to inform our customers that Insulation4US.com is currently operating at reduced capacity. Please refer to our Covid-19 page for further updates.

  Approved Merchant
  Nationwide Delivery
  Secure Payments
Friendly Customer Service
R-Max:

RMax TSX-8510 1in x 4ft x 8ft (48 Sheets)

$1,722.51$2,067.01Inc. VAT.

Quantity

RMax TSX-8510 1in x 4ft x 8ft (48 Sheets)

$1,722.51$2,067.01Inc. VAT.

+ Add To Cart

.. Visitors Right Now

R-Max:

RMax TSX-8510 1in x 4ft x 8ft (48 Sheets)

$1,722.51$2,067.01Inc. VAT.

rmax85101
Special Delivery

Over View: Rmax TSX-8510 is a polyisocyanurate thermal insulation board designed to meet the demands of today’s building industry. This product is suitable for use in walls, ceilings and limited roof applications in new construction for commercial, residential, agricultural and industrial buildings and in thermal retrofit construction within existing buildings.

Rmax TSX-8510 is a cost effective way to increase your buildings thermal efficiency with one of the thinnest profiles available on the market today. TSX-8510 is manufactured with reinforced aluminum foil facers on both sides.

The exposed side has a reflective aluminum surface to provide an attractive, strong and durable interior finish that is pressure washable and designed for use without a thermal barrier.

Article

R-Max Polyiso: How to Install?


What is Polyiso?


Polyisocyanurate or Polyiso, which it is commonly known as, is a type of insulation which comes in the form of foam boards. These foam boards tend to offer an extremely steady state of warmness and protection from the chilly cold weather for your house and office. Apart from the efficient roof insulation and wall insulation, these foam boards can also be used for floor insulation and crawlspace insulation in order to reduce heat loss from and also increase the overall thermal efficiency of your building. Although, it has been seen that the initial installation cost of these Polyiso insulation foam boards might be a little higher, yet, these insulation boards will save you hundreds or thousands of dollars, which you would have spent on installing various equipment for electric heating and cooling purposes.


Apart from these crucial advantages, one of the most important advantages of these R-Max Polyiso insulation foam boards is that the installation of these foam boards are very easy and can be easily done yourself, which will also save you money.


How to Install R-Max Polyiso?


Following are the items which will be required for the installation of the R-Max Polyiso rigid board insulation:



  • Polyisocyanurate rigid insulation

  • Drywalls

  • Any damp proofing instrument, such as vapor barrier

  • Plywood if required

  • Framing studs, preferably of 2x2, 2x4 or 2x6 dimensions

  • Multipurpose knife

  • Adhesive

  • Measuring tape

  • Foil tape


In this article, we are going to discuss the steps which you could use to install the Polyiso insulation foam boards more easily and more efficiently. 



  • Cut the Polyiso foam board with a multipurpose knife


In the event that you have to cut the sheets of the polyiso foam boards, you ought to use a multipurpose knife instead of any other kind of cutter, since it will cause deformation of the edges. Always remember that when you are about to cut the boards, you should use a straight edge and try to slice that side of the board with the foil material attached to it. If you try to cut from a non-foil side you run the risk of the foil tearing.


 



  • Attach all the cut foam boards with the adhesive


Try to avoid the nails and staples while attaching the foam boards. You should always try use a good quality adhesive like Tensor Construction Adhesives to attach all the cut pieces of the insulation boards. Be it for insulating your basement or your floors, you should always use an adhesive to join the pieces of the insulation board.


 



  • Installing moisture barriers


You should always install a vapor barrier while fitting your insulation. This is because moisture is a very deadly agent when it comes to insulation and it has been seen that moisture tends to damage the insulation material and reduce its efficiency. It is, therefore, very important to install a vapor barrier which gives the most efficient resistance to moisture. Also, keep it in mind to attach the vapor barrier to the studs of the frame, rather that attaching it directly to the insulation boards. Polyiso does not absorb moisture but if you do get a moisture buildup around the board for prolonged periods it may damage the foils reflective abilities and also could cause other issues in behind your wall with the building structure that you cannot see.


 



  • Frame the walls and cover it with drywall


Since it is not always a good idea to use nails or screws to attach the insulation foam boards to your walls (if you really need to do this you can but best to avoid if possible), you can either stick the foam boards to your wall using Tensor Adhesive Sprays or frame out your wall and insulate in between the studs with the polyiso foam boards. After framing the walls, cover the walls with the help of drywall to keep a moisture barrier within the layers of the insulation and covering material.


Conclusion


Polyiso insulation boards are, therefore, one of the best insulating materials for your house and offices and R-Max Polyiso insulation foam boards are one of the best in the market. They provide great technical service to their customers and you can purchase these directly from our website.

Brand R-Max
Material facing Foil-Faced
Product type Rigid Board
Product width in 48"
R value R6
Savtran pallet height inch 48
Savtran product length inch 96
Sq ft pack 768
Type of material Polyiso
Weight kg 324
Delivery Info
 

Standard Delivery

All standard orders are subject to a minimum $60 delivery charge. Special order items marked with a "special order" badge may incur alternative delivery charges (see table below). The vast majority of orders (over 90%) are dispatched in 5 - 10 working days. A signature may be required on receipt.  All deliveries are completed by our fleet of partner trucks and distributors. In some remote areas of the US a long distance charge may apply for shipping. This charge will be notified to the customer and agreed before any payment is made. Also this condition may apply for orders whereby the movement of stock is required from one depot to another across long distances or off shore orders. Generally the long distance charge may be requested on orders exceeding 100 miles from our closest depot. Some products such as Spray Foam insulation is a hazardous material and is subject to a delivery charge or bulk buy products are subject to additional delivery charges due to the massive discounts that are available. This is highlighted at the checkout stage of your order.


Special Order Delivery Charges

Product Range Delivery Charges
Perfect Aire FREE DELIVERY
Super R Location Based - Calculated at checkout
Tempshield Location Based - Calculated at checkout
Insulguard Location Based - Calculated at checkout
Sun-Tek Location Based - Calculated at checkout
Rmax Location Based - Calculated at checkout
Hunter Location Based - Calculated at checkout
Kingspan Location Based - Calculated at checkout
Flex Membranes Location Based - Calculated at checkout
Aluf Plastics Location Based - Calculated at checkout
Viper Location Based - Calculated at checkout
Rodenhouse Location Based - Calculated at checkout

Insulation4US will in most cases email the customer prior to delivery informing the customer of an eta. This is an eta only and is subject to change without notice to the customer. Insulation4US will endeavor to inform the customer of a delay in shipment by email if this may occur.

Deliveries will be notified to the customer by email. If the delivery date does not suit please reply by email a delivery date that suits you. Insulation4US does not accept liability for late deliveries or act of god circumstances that may cause your order to arrive on an alternative delivery time slot or date. Please note deliveries are not made on weekends. The customer is responsible in ensuring that there is an able bodied person at the shipping location on the day of delivery to assist with off loading. Delivery times can be given on the morning of delivery if required. All deliveries are to curb side only and any further handling by our delivery partners is at the discretion of our partner drivers.

Route - Package Protection Insurance

Insulation4US is proud to partner with Route, the leader in package protection and tracking solutions. By selecting Route at checkout your order will be protected from damage, loss*, or theft. In the unfortunate case that your order never comes or is broken upon arrival, you can easily file a claim with Route and receive a replacement or be fully reimbursed. We are excited to offer this service to you and we highly recommend you use Route package protection at checkout.

*Claims for packages marked "delivered" yet not received and where there is no evidence of “porch piracy” must be made 5 days after “delivery date” but no longer than 15 days to ensure it was not misdelivered or easily found around the premises."Claims for packages presumed to be lost (where the status is not "delivered") must be filed after 7 days (20 days for international) and within 30 days from the last checkpoint.

ORDER TRACKING: Check the progress on your order by emailing info@insulation4us.com Please note: Deliveries are made to the address supplied to us. If orders are returned to us by the carriage company we may make an additional delivery charge for re-dispatch. 

RETURNS: Should you have a need to return goods, please email info@insulation4us.com with your returns request. Once the Returns request has been completed our customer services team will provide you with further information for your return. Please ensure you have your order reference number ready when contacting us. When returning goods (except when goods are faulty), the customer will carry the cost of restocking the goods. This restocking charge is 30% of the value of the goods being returned. The customer will be subject to a collection charge where applicable.

To return products, please: 1. Carefully pack the items in protective bubble wrap, or similarly suitable packaging. Please do not use the product box as outer packaging and note that we will deduct the cost of any returned items damaged from any amount refunded to you. Please include the goods order number with your name, date of order and address details. 3. The address of return will depend on what part of the US the goods have been delivered to. This will be given to the customer once the customer informs Insulation4US of the returns and quotes the purchase order number. Please note that, once opened and or used, products cannot be returned to us unless the product is faulty or broken. To help us process an exchange, refund or credit note when returning goods, we would be grateful if you could supply details of your order number, name, date of order. We highly recommend that items are returned via a Recorded Delivery service as we do not accept responsibility for items lost in the post.

CANCELLATIONS & REFUNDS: In addition to our returns policy under the distance selling regulations you have the legal right to cancel your order within seven working days from the date of receipt of the merchandise if you send us a notice of cancellation in writing and return the merchandise to us in their original, unopened and unused condition. You must contact us by email as outlined above. Please note that if the item has already been shipped from our warehouse a restocking charge will apply and returns shipping charge. Your statutory rights are not affected. A full refund may be provided where incorrect, broken or damaged goods have been provided. Any orders cancelled outside of the first 2 hours of being placed will be subject to a cancellation fee of $30. All orders are processed within this time frame once placed online or over the phone and this is a none refundable fee due to procedures in place to process your order in a speedy manor.

SPECIAL ORDERS: Any products ordered in to our warehouse or ordered direct from the manufacture such as bulk buy products specifically for a customer is non returnable and  or non refundable. Any items that need to be ordered in advance specifically for a customer Insulation4US will notify the customer in advance of this and the customer can decide to proceed with their order on cancel at no additional cost.

Manufacturers products Defect: If for any reason that you feel that the product you have received is defect please contact Insulation4US immediately with photographs of the defect product. Please note Insulation4US is not liable for any manufacturer product defects and such issues will be addressed with the manufacturers product quality control team for further examination. If you feel the product is defect do not install the product as use of the product could null and void any manufacturer warrantee. Insulation4US will notify the manufacturer of any defects and the manufacturer will make arrangements to inspect such products. Please note damage to products during delivery is not a manufacturers defect and such issues should be addressed to Insulation4US and the usual steps taken when returning goods. If you do not wish to accept the goods upon delivery do not remove from the delivery truck and return them to back to Insulation4US. Please notify Insulation4US immediatly of this issue so we can arrange for undamaged goods to be redelivered. The customer will not be charged for redelivery in this instance.

Product Reviews

Over View: Rmax TSX-8510 is a polyisocyanurate thermal insulation board designed to meet the demands of today’s building industry. This product is suitable for use in walls, ceilings and limited roof applications in new construction for commercial, residential, agricultural and industrial buildings and in thermal retrofit construction within existing buildings.

Rmax TSX-8510 is a cost effective way to increase your buildings thermal efficiency with one of the thinnest profiles available on the market today. TSX-8510 is manufactured with reinforced aluminum foil facers on both sides.

The exposed side has a reflective aluminum surface to provide an attractive, strong and durable interior finish that is pressure washable and designed for use without a thermal barrier.

Delivery Info
 

Standard Delivery

All standard orders are subject to a minimum $60 delivery charge. Special order items marked with a "special order" badge may incur alternative delivery charges (see table below). The vast majority of orders (over 90%) are dispatched in 5 - 10 working days. A signature may be required on receipt.  All deliveries are completed by our fleet of partner trucks and distributors. In some remote areas of the US a long distance charge may apply for shipping. This charge will be notified to the customer and agreed before any payment is made. Also this condition may apply for orders whereby the movement of stock is required from one depot to another across long distances or off shore orders. Generally the long distance charge may be requested on orders exceeding 100 miles from our closest depot. Some products such as Spray Foam insulation is a hazardous material and is subject to a delivery charge or bulk buy products are subject to additional delivery charges due to the massive discounts that are available. This is highlighted at the checkout stage of your order.


Special Order Delivery Charges

Product Range Delivery Charges
Perfect Aire FREE DELIVERY
Super R Location Based - Calculated at checkout
Tempshield Location Based - Calculated at checkout
Insulguard Location Based - Calculated at checkout
Sun-Tek Location Based - Calculated at checkout
Rmax Location Based - Calculated at checkout
Hunter Location Based - Calculated at checkout
Kingspan Location Based - Calculated at checkout
Flex Membranes Location Based - Calculated at checkout
Aluf Plastics Location Based - Calculated at checkout
Viper Location Based - Calculated at checkout
Rodenhouse Location Based - Calculated at checkout

Insulation4US will in most cases email the customer prior to delivery informing the customer of an eta. This is an eta only and is subject to change without notice to the customer. Insulation4US will endeavor to inform the customer of a delay in shipment by email if this may occur.

Deliveries will be notified to the customer by email. If the delivery date does not suit please reply by email a delivery date that suits you. Insulation4US does not accept liability for late deliveries or act of god circumstances that may cause your order to arrive on an alternative delivery time slot or date. Please note deliveries are not made on weekends. The customer is responsible in ensuring that there is an able bodied person at the shipping location on the day of delivery to assist with off loading. Delivery times can be given on the morning of delivery if required. All deliveries are to curb side only and any further handling by our delivery partners is at the discretion of our partner drivers.

Route - Package Protection Insurance

Insulation4US is proud to partner with Route, the leader in package protection and tracking solutions. By selecting Route at checkout your order will be protected from damage, loss*, or theft. In the unfortunate case that your order never comes or is broken upon arrival, you can easily file a claim with Route and receive a replacement or be fully reimbursed. We are excited to offer this service to you and we highly recommend you use Route package protection at checkout.

*Claims for packages marked "delivered" yet not received and where there is no evidence of “porch piracy” must be made 5 days after “delivery date” but no longer than 15 days to ensure it was not misdelivered or easily found around the premises."Claims for packages presumed to be lost (where the status is not "delivered") must be filed after 7 days (20 days for international) and within 30 days from the last checkpoint.

ORDER TRACKING: Check the progress on your order by emailing info@insulation4us.com Please note: Deliveries are made to the address supplied to us. If orders are returned to us by the carriage company we may make an additional delivery charge for re-dispatch. 

RETURNS: Should you have a need to return goods, please email info@insulation4us.com with your returns request. Once the Returns request has been completed our customer services team will provide you with further information for your return. Please ensure you have your order reference number ready when contacting us. When returning goods (except when goods are faulty), the customer will carry the cost of restocking the goods. This restocking charge is 30% of the value of the goods being returned. The customer will be subject to a collection charge where applicable.

To return products, please: 1. Carefully pack the items in protective bubble wrap, or similarly suitable packaging. Please do not use the product box as outer packaging and note that we will deduct the cost of any returned items damaged from any amount refunded to you. Please include the goods order number with your name, date of order and address details. 3. The address of return will depend on what part of the US the goods have been delivered to. This will be given to the customer once the customer informs Insulation4US of the returns and quotes the purchase order number. Please note that, once opened and or used, products cannot be returned to us unless the product is faulty or broken. To help us process an exchange, refund or credit note when returning goods, we would be grateful if you could supply details of your order number, name, date of order. We highly recommend that items are returned via a Recorded Delivery service as we do not accept responsibility for items lost in the post.

CANCELLATIONS & REFUNDS: In addition to our returns policy under the distance selling regulations you have the legal right to cancel your order within seven working days from the date of receipt of the merchandise if you send us a notice of cancellation in writing and return the merchandise to us in their original, unopened and unused condition. You must contact us by email as outlined above. Please note that if the item has already been shipped from our warehouse a restocking charge will apply and returns shipping charge. Your statutory rights are not affected. A full refund may be provided where incorrect, broken or damaged goods have been provided. Any orders cancelled outside of the first 2 hours of being placed will be subject to a cancellation fee of $30. All orders are processed within this time frame once placed online or over the phone and this is a none refundable fee due to procedures in place to process your order in a speedy manor.

SPECIAL ORDERS: Any products ordered in to our warehouse or ordered direct from the manufacture such as bulk buy products specifically for a customer is non returnable and  or non refundable. Any items that need to be ordered in advance specifically for a customer Insulation4US will notify the customer in advance of this and the customer can decide to proceed with their order on cancel at no additional cost.

Manufacturers products Defect: If for any reason that you feel that the product you have received is defect please contact Insulation4US immediately with photographs of the defect product. Please note Insulation4US is not liable for any manufacturer product defects and such issues will be addressed with the manufacturers product quality control team for further examination. If you feel the product is defect do not install the product as use of the product could null and void any manufacturer warrantee. Insulation4US will notify the manufacturer of any defects and the manufacturer will make arrangements to inspect such products. Please note damage to products during delivery is not a manufacturers defect and such issues should be addressed to Insulation4US and the usual steps taken when returning goods. If you do not wish to accept the goods upon delivery do not remove from the delivery truck and return them to back to Insulation4US. Please notify Insulation4US immediatly of this issue so we can arrange for undamaged goods to be redelivered. The customer will not be charged for redelivery in this instance.

Article

R-Max Polyiso: How to Install?


What is Polyiso?


Polyisocyanurate or Polyiso, which it is commonly known as, is a type of insulation which comes in the form of foam boards. These foam boards tend to offer an extremely steady state of warmness and protection from the chilly cold weather for your house and office. Apart from the efficient roof insulation and wall insulation, these foam boards can also be used for floor insulation and crawlspace insulation in order to reduce heat loss from and also increase the overall thermal efficiency of your building. Although, it has been seen that the initial installation cost of these Polyiso insulation foam boards might be a little higher, yet, these insulation boards will save you hundreds or thousands of dollars, which you would have spent on installing various equipment for electric heating and cooling purposes.


Apart from these crucial advantages, one of the most important advantages of these R-Max Polyiso insulation foam boards is that the installation of these foam boards are very easy and can be easily done yourself, which will also save you money.


How to Install R-Max Polyiso?


Following are the items which will be required for the installation of the R-Max Polyiso rigid board insulation:



  • Polyisocyanurate rigid insulation

  • Drywalls

  • Any damp proofing instrument, such as vapor barrier

  • Plywood if required

  • Framing studs, preferably of 2x2, 2x4 or 2x6 dimensions

  • Multipurpose knife

  • Adhesive

  • Measuring tape

  • Foil tape


In this article, we are going to discuss the steps which you could use to install the Polyiso insulation foam boards more easily and more efficiently. 



  • Cut the Polyiso foam board with a multipurpose knife


In the event that you have to cut the sheets of the polyiso foam boards, you ought to use a multipurpose knife instead of any other kind of cutter, since it will cause deformation of the edges. Always remember that when you are about to cut the boards, you should use a straight edge and try to slice that side of the board with the foil material attached to it. If you try to cut from a non-foil side you run the risk of the foil tearing.


 



  • Attach all the cut foam boards with the adhesive


Try to avoid the nails and staples while attaching the foam boards. You should always try use a good quality adhesive like Tensor Construction Adhesives to attach all the cut pieces of the insulation boards. Be it for insulating your basement or your floors, you should always use an adhesive to join the pieces of the insulation board.


 



  • Installing moisture barriers


You should always install a vapor barrier while fitting your insulation. This is because moisture is a very deadly agent when it comes to insulation and it has been seen that moisture tends to damage the insulation material and reduce its efficiency. It is, therefore, very important to install a vapor barrier which gives the most efficient resistance to moisture. Also, keep it in mind to attach the vapor barrier to the studs of the frame, rather that attaching it directly to the insulation boards. Polyiso does not absorb moisture but if you do get a moisture buildup around the board for prolonged periods it may damage the foils reflective abilities and also could cause other issues in behind your wall with the building structure that you cannot see.


 



  • Frame the walls and cover it with drywall


Since it is not always a good idea to use nails or screws to attach the insulation foam boards to your walls (if you really need to do this you can but best to avoid if possible), you can either stick the foam boards to your wall using Tensor Adhesive Sprays or frame out your wall and insulate in between the studs with the polyiso foam boards. After framing the walls, cover the walls with the help of drywall to keep a moisture barrier within the layers of the insulation and covering material.


Conclusion


Polyiso insulation boards are, therefore, one of the best insulating materials for your house and offices and R-Max Polyiso insulation foam boards are one of the best in the market. They provide great technical service to their customers and you can purchase these directly from our website.

Brand R-Max
Material facing Foil-Faced
Product type Rigid Board
Product width in 48"
R value R6
Savtran pallet height inch 48
Savtran product length inch 96
Sq ft pack 768
Type of material Polyiso
Weight kg 324