Beating the summer heat with polystyrene insulation

With the use of suitable home insulation, the environment of your home can be kept comfortable enough in any season. The heat can become quite bothersome in the summers if house insulation is ineffective or completely absent, driving up energy bills due to the dependence on the home-cooling systems. However if effective home insulation is installed it can considerably keep the temperature indoor under control and also reduce the utility bills with optimal use of the cooling system. It has been estimated by experts that proper home insulation could translate into the saving of about 40% on utility bills for the home owner. This is so because once the temperature inside becomes comfortable enough, the cooling system may be turned off; the home insulation then plays its role in the prevention of the leakage of energy while the temperature stays steady.

Keep your home warm with house insulation

from Owens Corning insulation for the home in the form of polystyrene is quite effective; polystyrene is a natural insulator which works well to combat high temperatures as well as noise. Polystyrene insulation acts as a barrier against heat by not allowing it to enter and it also does not allow the cool air to escape. So, effective insulation materials such as this offered by Owens Corning insulation, work in two ways to keep the temperature regulated and comfortable and thus reducing the amount of energy needed to keep the temperature at a consistent level.

Some two decades back a quite effective form of polyisocyanurate was manufactured in the shape of hunter insulation or hunter panels and Rmax insulation. These effective and innovative hunter insulation panels are composed of rigid foam which comes from a polyisocyanurate foam core with fiber reinforced facers on each side. Mostly the hunter insulation is used while new structures are being built for roof insulation as well as wall insulation and for the interior walls of already existing structures; it can be customized for use in both residential and commercial buildings. It may be used for the slopes or a straight assembly for roof insulation as well as for use in ceiling panels and continuous wall insulation.

Under Hunter insulation, a high-density cover board is also made which is an insulation panel to be used as a cover board. The use of this H-shield is the same when it comes to roof insulation or wall insulation. For particularly roof insulation in commercial projects a unique material of hunter insulation is used which is known as composite insulation CG panels and ideal for use in structured where high thermal efficiency is required. It also offers optimal durability when used in both old structures or existing buildings. It also maximized R-value since it’s has a much thinner profile as compared to other home insulation materials available in the market.

For wall insulation particularly to be used in exterior walls, there are several kinds of exterior wall insulation panels available. The class A exterior wall insulation panel is composed of high-class rigid polyisocyanurate foam and laminated during the process of manufacturing for the reinforcement of foil facers. Another kind is a panel which is a high thermal resistive rigid insulation panel composed of a closed cell polyisocyanurate foam core; it is bonded to a premium performance coated glass facer while it’s being manufactured. It is meant to be used as a continuous insulation solution within the building envelope, particularly for commercial buildings or structures. Another form of exterior wall insulation is the Hunter foil insulation panel which is bonded to an impermeable foil facing material during the process of manufacturing. It is meant to be used in commercial cavity wall applications so that continuous insulation can be provided to the structure. Lastly, for wall insulation, there is a Hunter panel which is bonded with a fiber reinforced facer on one side and fire treated plywood on the other.

Coming to the Hunter panels used for roof insulation, the flat polysio panel is the base of Hunter insulation used for flat roofs. When the aim is to enhance the functionality aspect of the roof system, Hunter insulation is the definitive answer. This Hunter panel is bonded with fiber reinforced or fiberglass facers, with the end result of a panel which is quite rigid. Then there is the tapered Hunter panel which is basically meant to eradicate the issue of ponding water on the roof; this strengthens the roof and discourages the formation of mould and algae. Other roof insulation materials in Hunter insulation arena are those which offer which offer a combination of polyiso properties with a nailable base meant to be used for metal roofs, the ventilated nail base insulation panel, the flat polysio insulation bonded to wood fiberboard, tapered polysio insulation bonded to wood fiberboard and the rigid polysio insulation bonded to foil.

Other companies which provide effective polystyrene insulation include Johns Manville and Rmax insulation. These have been a step ahead in the innovation of home insulation solutions and offer a varied line of high-quality, polyiso-based products which deliver maximum R-values, with minimum environmental impact; these house insulation products which designed specifically to beat the summer heat offer efficiency in installation, the cost of the project is enough to match the design of the building or structure. Home insulation products offered by Rmax insulation are strictly tested to match quality standard and can match the needs in the realm of industry, commercial as well as house insulation forefront.

Johns Manville also offers the finest in home insulation products meant to enhance energy efficiency and regulating the temperature of the household. The insulation materials are flawlessly engineered to be durable and efficient, certified to perform, backed by trained and professional staff and provided so as to match distinct home insulation needs of customers.

All in all, polystyrene / polyiso insulation serves to be an effective thermal insulation solution for the household, and it is also a cost-effective measure. Also, rigid board panels can be made with expanded polystyrene (XPS) of different densities, various thickness's, and sizes to match requirements.